If you're anything like me, you get this great idea for a project. You go out, get all your supplies. You might even get started and be going along a happy pace. And then someone wakes from a nap, or needs a drink, or has a diaper in need of changing, or just wants to play hide and seek for the twelfth time that day. But like any great idea or project, the potential of it coming to fruition totally has a shelf life. Which is why I needed to get this project finished. And because my MIL gave us a deadline, which, I'm happy to say, we made...kind of...well, a third of the project was finished by Sunday. Does that count?
When we left off with these pallet shelves, we had finished painting them and were trying to decide the best way to anchor them on the wall. We also had to figured out how we wanted to place them. I had made four shelves, but that felt too crowded for the space. The wall itself was 115 inches and each pallet shelf was 40. Here is a look at some of our options with a little color behind them to make them easier to differentiate.
The last one kinda looks like the little face that pops up saying "Aww snap!" when there is something wrong with your computer, no? We didn't want the shelves too high or too low (little hands) so the middle option didn't make sense for use. I can't reach top and our littlescould too quickly reach the bottom. The first just looked a bit unbalanced to us. The third was our winner, winner, chicken dinner.
Now, how to anchor these lovelies?
My husband and I are not your most seasoned home owners. We used to live in a condo so the HOA took care of all the outside stuff. I'm pretty handy, but a condo doesn't need much. Then we bought our first house and quickly learned how many leaves can fall on half an acre, along with many more home-ownership lessons. However, I'm a pretty good researcher and he trusts me, so there ya go. After lots of trials and errors, I'd like to think we've finally learned how to think through a project before getting so far in that we look at each other and say "shit".
After looking more pallet and shelf hanging tutorials than I care to admit, I found these Ook mirror hangers that work like a French cleat. If you haven't used one before, I highly recommend them. They are so easy to install and can hold a lot of weight. I picked them up from Home Depot for around $15 for the 200 lbs capacity cleats and $10 for the 100 lbs capacity cleat. Do I really think that we were going to put 200 lbs on the shelf? No, but I figured better to err on the safe side than have a little one get conked on the head by a falling shelf. One side of the cleft attaches to the shelf, the other side to the wall, and then they slide into each other.
We used painters tape to get an idea of the height at which we wanted to hang them, then measured everything out to be sure there was some sort of symmetry. Remember, these are rustic, uneven shelves, so they were bound to look a little off anyway due to varying widths of the wood and such. We hung the lowest shelf first, installing the first part of the cleat to the back of shelf.
Then we found the center of the wall, placed the wall anchored cleat up, and marked the holes for the screws with pencil. To be even safer, we decided not to drill into the drywall itself, which these DO say you can do. Instead we used drywall anchors. Now, we had the kind that you hammer in. Probably not the best idea since we were doing this at 8:30/9-ish with the girls sleeping upstairs. I made such a racket I couldn't believe they didn't wake up. Not a peep on the monitor! Parental win there. With the anchors hammered in, we put the cleat back up, placed the first screw in the middle, then level out the cleat before drilling in the rest of the screws.
Pretty simple, right? Now, the moment of truth. Would it turn out as we intended? Would my MIL like it? I'd say yes, on both accounts.
I went ahead and marked out the remaining two wall cleat positions while my husband drilled and prepped the two shelves. That meant today all we needed to do was hammer in those anchors, screw on the cleat and hang them right?
Things always pop in project, don't they? We don't own a stud finder, though I like to take a spoon and pretend it gets crazy beepy when I point it at my husband, but that's a whole other conversation. As I was making dinner,and our stinker belle was crying about a owie tummy, and my husband was trying to get those screws in the wall
he kept hitting something
in more than one hole
We're not sure if it was a stud or perhaps (our bad) an air duct or something important behind the drywall. However, we were able to readjust the placement of the screws and get those cleats on the wall. And take care of stinker belles tummy. I'll share that on another post!
And so, one day off our Sunday deadline, we were able to hang our three shelves.
Three? But I thought there were four! There are and the fourth one is getting a new home soon. ! For the meantime, we are deciding what to put in our new shelves, and patting ourselves on the back for a job well done. Definitely saving the upper shelves for wine and other libations, maybe another plant or two. I love how each one is just a little bit different and I adore the pop of green life I can hang on the wall now. Any other suggestions for what we could fill them with? And G'ma, what do you think?
I'm Tonia, a Midwesterner transplanted to Colorado. I'm a mom of two lovely littles, a yoga instructor, DIY-er, teacher, stay at home mom, and a doTERRA Wellness Advocate. I blog about a little bit of all of these and everything in between!
Are you looking for natural health options, but don't know where to start? Book a 1-on-1 appointment with me! We'll spend about 30 minutes getting to know your health goals and concerns, learn a bit about doTERRA, and go over the most commonly used oils that meet your needs. You don't have to buy anything, but if you see something you like, of course I can help you!